New
Brake Pads and Shoes
Toyota Alphard Rear Brake Pads (MNH / ANH10 / ANH15)
Contact for Price
In Stock (4 available)
Vehicle Compatibility
Toyota ALPHARD
ANH10
ANH15
MNH10
MNH15
Compatible Years
2002
2003
2004
2005
2006
2007
2008
Description
Rear brake pad set for the first-generation Toyota Alphard, the 10-series built between 2002 and 2008, covering both the four-cylinder ANH and V6 MNH variants.
Rear pads on the 10-series Alphard wear far more slowly than the fronts, so they are often overlooked entirely. That neglect is what causes the two common failures on this axle: the pad backing plates corrode and swell where they sit in the caliper carrier, and the slide pins seize from lack of use. Either will hold the pad lightly against the disc, producing a hot wheel, a faint burning smell and rapid uneven wear.
When fitting, clean the caliper carrier abutments back to bare metal, re-grease the slide pins, and check that the pads move freely in their seats before refitting the wheel. Replace as an axle set.
Fits ANH10, ANH15, MNH10 and MNH15.
Rear pads on the 10-series Alphard wear far more slowly than the fronts, so they are often overlooked entirely. That neglect is what causes the two common failures on this axle: the pad backing plates corrode and swell where they sit in the caliper carrier, and the slide pins seize from lack of use. Either will hold the pad lightly against the disc, producing a hot wheel, a faint burning smell and rapid uneven wear.
When fitting, clean the caliper carrier abutments back to bare metal, re-grease the slide pins, and check that the pads move freely in their seats before refitting the wheel. Replace as an axle set.
Fits ANH10, ANH15, MNH10 and MNH15.
Specifications
| Sold As | Complete axle set |
|---|---|
| Position | Rear axle |
| Brake Type | Disc |
| OEM Part No | 04466-28080 |
| Chassis Codes | ANH10, ANH15, MNH10, MNH15 |
| Quantity Required | 4 pads (one axle set) |