New
Brake Pads and Shoes
Honda Step-Wagon / Odyssey Rear Brake Pads
Contact for Price
In Stock (5 available)
Vehicle Compatibility
Honda STEP-WAGON
RG1
RG2
RG3
RG4
Honda Odyssey
RB1
RB2
RB3
RB4
Compatible Years
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
Description
Rear brake pad set covering the RG-series Honda Step-Wagon and the RB-series Honda Odyssey, two platforms that share rear brake hardware.
Rear pads on these wear slowly, which in practice means they are usually replaced because the caliper has started to stick rather than because the friction material has run out. The rear caliper slides on both platforms are a known corrosion point, and a seized slide holds the pad against the disc, producing heat, smell and rapid one-sided wear.
Fit as an axle set. Strip, clean and re-grease the slides, and confirm both pads move freely in the carrier before refitting. If the disc is scored or has a heavy outer lip, replace it, a new pad on a ridged disc will never bed properly.
Fits Step-Wagon RG1 to RG4 and Odyssey RB1 to RB4.
Rear pads on these wear slowly, which in practice means they are usually replaced because the caliper has started to stick rather than because the friction material has run out. The rear caliper slides on both platforms are a known corrosion point, and a seized slide holds the pad against the disc, producing heat, smell and rapid one-sided wear.
Fit as an axle set. Strip, clean and re-grease the slides, and confirm both pads move freely in the carrier before refitting. If the disc is scored or has a heavy outer lip, replace it, a new pad on a ridged disc will never bed properly.
Fits Step-Wagon RG1 to RG4 and Odyssey RB1 to RB4.
Specifications
| Sold As | Complete axle set |
|---|---|
| Position | Rear axle |
| Brake Type | Disc |
| OEM Part No | 43022-SFE-N00 |
| Odyssey Codes | RB1, RB2, RB3, RB4 |
| Step-Wagon Codes | RG1, RG2, RG3, RG4 |
| Quantity Required | 4 pads (one axle set) |