New
Brake Components
Honda Step-Wagon Front Brake Rotors (RK)
Contact for Price
In Stock (4 available)
Vehicle Compatibility
Honda STEP-WAGON
RK1
RK2
RK3
RK4
RK5
RK6
RK7
Compatible Years
2009
2010
2011
2012
2013
2014
2015
Description
Front brake rotors for the fourth-generation Honda Step-Wagon, the RK series built from 2009 to 2015. Manufactured by DriveJoy, Tokico's Japanese OE-tier aftermarket brand, under Honda part number 45251-TA0-A01.
The Step-Wagon is a tall, heavy eight-seat MPV and the front discs carry almost all of its braking load. The characteristic complaint on these is a pulsation through the pedal that builds over time, which is disc thickness variation rather than genuine warping, and it is not fixed by fitting new pads alone.
Replace rotors in axle pairs and fit new pads at the same time. Clean the hub face back to bare metal before mounting, as rust trapped between hub and rotor introduces runout from the moment it is bolted up. Torque the wheel nuts properly and evenly, uneven wheel-nut torque is a genuine cause of disc distortion on this platform.
The Step-Wagon is a tall, heavy eight-seat MPV and the front discs carry almost all of its braking load. The characteristic complaint on these is a pulsation through the pedal that builds over time, which is disc thickness variation rather than genuine warping, and it is not fixed by fitting new pads alone.
Replace rotors in axle pairs and fit new pads at the same time. Clean the hub face back to bare metal before mounting, as rust trapped between hub and rotor introduces runout from the moment it is bolted up. Torque the wheel nuts properly and evenly, uneven wheel-nut torque is a genuine cause of disc distortion on this platform.
Specifications
| Sold As | Per piece - order 2 for an axle pair |
|---|---|
| Position | Front axle |
| Brake Type | Ventilated disc |
| OEM Part No | 45251-TA0-A01 |
| Fitting Note | Clean hub face before mounting and torque wheel nuts evenly |
| Manufacturer | DriveJoy (Tokico) |
| Chassis Codes | RK1 - RK7 |