New
Suspension
Toyota Grand Hiace / Hiace Front Upper Suspension Arm Set (LH & RH)
Contact for Price
Only 1 left in stock
Vehicle Compatibility
Toyota Grand Hiace
KCH10
KCH12
KCH16
VCH10
VCH16
VCH22
VCH28
Toyota HIACE
KZH106
KZH120
KZH126
RZH109
RZH119
Description
Genuine Toyota front upper suspension arm set, part number 48066-29105, supplied as a matched left and right pair. Covers the Grand Hiace VCH and KCH codes and the Hiace KZH106, KZH120, KZH126, RZH109 and RZH119.
On a double-wishbone front end the upper arm sets camber and caster geometry and carries the upper ball joint. Wear appears in two places, the arm's pivot bushings and the ball joint itself, and both produce the same complaints: a knock from the front over bumps, wandering steering, uneven front tyre wear, and an alignment that drifts out of specification.
Supplied as a left and right set, which is how they should be replaced, fitting one new arm against a worn one gives asymmetric geometry and an alignment that cannot be corrected properly.
A full wheel alignment after fitting is required, not optional.
On a double-wishbone front end the upper arm sets camber and caster geometry and carries the upper ball joint. Wear appears in two places, the arm's pivot bushings and the ball joint itself, and both produce the same complaints: a knock from the front over bumps, wandering steering, uneven front tyre wear, and an alignment that drifts out of specification.
Supplied as a left and right set, which is how they should be replaced, fitting one new arm against a worn one gives asymmetric geometry and an alignment that cannot be corrected properly.
A full wheel alignment after fitting is required, not optional.
Specifications
| Sold As | LH and RH matched set |
|---|---|
| Position | Front upper |
| Hiace Codes | KZH106, KZH120, KZH126, RZH109, RZH119 |
| OEM Part No | 48066-29105 |
| After Fitting | Full wheel alignment required |
| Genuine Toyota | Yes |
| Grand Hiace Codes | VCH and KCH series |