Toyota Previa parts

Fits all Previa codes Pick a code
3 parts for the Previa
No image available
New
Brake Pads and Shoes
Toyota Alphard / Vellfire / Estima Front Brake Pads (GGH / ANH20)
New
Front brake pad set covering the 20-series Toyota Alphard and Vellfire alongside the 50-series Estima and the Previa. One of the most widely shared front pad fitments in the Toyota MPV range, which is why this is the highest-stock line in the catalogue. These are large, heavy front-wheel-biased people movers, and the front brakes carry most of the load. Expect pad life to fall well short of a passenger car's, particularly on vehicles used fully loaded or in stop-start city work. Symptoms of a worn set are the usual ones: a squeal from the wear indicator, a longer pedal, or a gritty grinding noise once the backing plate makes contact with the disc. Always fit as an axle set and check the disc thickness while the caliper is off. Bedding in a new set properly, with a series of moderate stops from moderate speed, makes a real difference to both noise and initial bite.
No image available
New Only 2 left
Brake Pads and Shoes
Toyota Town Ace / Noah / Lite Ace Front Brake Pads
New
Front brake pad set covering the Toyota Town Ace, Town Ace Noah, Lite Ace and Previa range. Supplied by Project A under Toyota part number 04465-28340. These are working vans and light people movers with a forward weight bias, so the front axle takes most of the braking load and the pads wear correspondingly fast under commercial use. Loaded running and stop-start delivery work will shorten pad life considerably compared with the same vehicle used privately. Fit as an axle set and inspect the discs while the caliper is off. On higher-mileage vans check the flexible brake hoses at the same time, a perished hose can act as a one-way valve and hold pressure at the caliper, which drags the pad and destroys a new set quickly. Please confirm your chassis code and model year before ordering, as this pad covers several generations.
No image available
New Only 2 left
Suspension
Toyota Alphard / Estima Rear Axle Bushing
New
Genuine Toyota rear axle bushing, part number 48725-58010, covering the 10-series Alphard, the ACR30/ACR40 Estima, the Isis and the Previa. This bushing locates the rear suspension to the body while allowing controlled movement. As the rubber perishes the axle gains unwanted lateral compliance, and the symptoms are the ones owners usually blame on tyres or alignment: a vague, wandering rear end, a clunk over bumps or on turn-in, uneven rear tyre wear, and a rear alignment that will not stay where it is set. On vehicles of this age and weight these are a routine wear item. Replace them in pairs rather than singly, as a new bushing working against a perished one on the opposite side gives an inconsistent result. Pressing is required, and a rear wheel alignment afterwards is necessary rather than optional.