Honda Odyssey parts

Fits all Odyssey codes Pick a code
26 parts for the Odyssey
No image available
New
Brake Pads and Shoes
Honda Step-Wagon / Odyssey Rear Brake Pads
New
Rear brake pad set covering the RG-series Honda Step-Wagon and the RB-series Honda Odyssey, two platforms that share rear brake hardware. Rear pads on these wear slowly, which in practice means they are usually replaced because the caliper has started to stick rather than because the friction material has run out. The rear caliper slides on both platforms are a known corrosion point, and a seized slide holds the pad against the disc, producing heat, smell and rapid one-sided wear. Fit as an axle set. Strip, clean and re-grease the slides, and confirm both pads move freely in the carrier before refitting. If the disc is scored or has a heavy outer lip, replace it, a new pad on a ridged disc will never bed properly. Fits Step-Wagon RG1 to RG4 and Odyssey RB1 to RB4.
No image available
New
Brake Pads and Shoes
Honda Step-Wagon / Odyssey Front Brake Pads
New
Front brake pad set covering the RG-series Honda Step-Wagon and the RB-series Honda Odyssey. The companion front set to part 43022-SFE-N00. The fronts on both platforms do the bulk of the braking and wear accordingly, typically two to three times faster than the rears. Wear is usually even, and the first sign is the wear indicator squealing under light braking. Fit as an axle set and check disc thickness against the minimum stamped on the disc hub while the caliper is off. A pedal pulsation on these is almost always disc runout rather than a pad problem, and fitting new pads to a warped disc will not fix it. Fits Step-Wagon RG1 to RG4 and Odyssey RB1 to RB4.