Authentic JDM Parts

Quality OEM and aftermarket parts for your Japanese vehicles. From engines to body parts — we've got you covered.

← Browse by Make / Model instead
37+
Parts Available
100%
Quality Guaranteed
Fast
Shipping
Showing 12 of 37 parts
Filters:
Category: Brake Pads and Shoes
Clear All
No image available
New Only 1 left
Brake Pads and Shoes
Front Brake Pad (Set)
New
Front Brake Pad (Set) to fit the Honda Odyssey (RB3), 2000cc petrol. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Supplied as a set. Contact us for current pricing, availability and Canada-wide shipping.
No image available
New Only 1 left
Brake Pads and Shoes
Rear Brake Pad (Set)
New
Rear Brake Pad (Set) to fit the Honda Odyssey (RB3), 2000cc petrol. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Supplied as a set. Contact us for current pricing, availability and Canada-wide shipping.
No image available
New Only 1 left
Brake Pads and Shoes
Front Brake Pad (LH & RH Set)
New
Front Brake Pad (LH & RH Set) to fit the Mitsubishi Delica (PD6W), 3000cc petrol, 4x4. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Supplied as a left and right set. Contact us for current pricing, availability and Canada-wide shipping.
No image available
New Only 3 left
Brake Pads and Shoes
Nissan Elgrand E51 Front Brake Pads
New
Front brake pad set for the Nissan Elgrand E51, the second-generation eight-seat luxury van built from 2002 to 2010. Supplied by Hapad under Nissan's own Pitwork part number AY040-NS112. The E51 is a heavy vehicle and runs large ventilated front discs, so the front axle does the overwhelming majority of the braking work. Front pads on this platform are a routine wear item rather than a fault repair: the friction material wears down gradually with use, and towing, loaded running or sustained downhill driving all accelerate it. Replace pads in axle sets, never individually, and inspect the discs at the same time. Scoring, a pronounced lip at the outer edge of the disc, or uneven pad wear across the set usually points at a sticking caliper slide pin or a seized piston, which will chew through new pads quickly if it isn't dealt with first. Fits the E51, NE51, ME51 and MNE51 chassis variants.
No image available
New
Brake Pads and Shoes
Toyota Alphard / Vellfire / Estima Front Brake Pads (GGH / ANH20)
New
Front brake pad set covering the 20-series Toyota Alphard and Vellfire alongside the 50-series Estima and the Previa. One of the most widely shared front pad fitments in the Toyota MPV range, which is why this is the highest-stock line in the catalogue. These are large, heavy front-wheel-biased people movers, and the front brakes carry most of the load. Expect pad life to fall well short of a passenger car's, particularly on vehicles used fully loaded or in stop-start city work. Symptoms of a worn set are the usual ones: a squeal from the wear indicator, a longer pedal, or a gritty grinding noise once the backing plate makes contact with the disc. Always fit as an axle set and check the disc thickness while the caliper is off. Bedding in a new set properly, with a series of moderate stops from moderate speed, makes a real difference to both noise and initial bite.
No image available
New
Brake Pads and Shoes
Toyota Alphard Rear Brake Pads (MNH / ANH10 / ANH15)
New
Rear brake pad set for the first-generation Toyota Alphard, the 10-series built between 2002 and 2008, covering both the four-cylinder ANH and V6 MNH variants. Rear pads on the 10-series Alphard wear far more slowly than the fronts, so they are often overlooked entirely. That neglect is what causes the two common failures on this axle: the pad backing plates corrode and swell where they sit in the caliper carrier, and the slide pins seize from lack of use. Either will hold the pad lightly against the disc, producing a hot wheel, a faint burning smell and rapid uneven wear. When fitting, clean the caliper carrier abutments back to bare metal, re-grease the slide pins, and check that the pads move freely in their seats before refitting the wheel. Replace as an axle set. Fits ANH10, ANH15, MNH10 and MNH15.
No image available
New Only 1 left
Brake Pads and Shoes
Toyota Hiace Front Brake Pads (TRH / KDH)
New
Front brake pad set for the H200-series Toyota Hiace, covering the full run of TRH petrol and KDH diesel variants from 2004 onward. The H200 Hiace is a working vehicle and its front brakes are worked accordingly. Commercial use, constant loading and the vehicle's forward weight bias mean front pads are the single most frequently replaced brake component on this platform. Most operators find the fronts outlast the rears by a wide margin in neither direction, they simply wear fast. Fit as an axle set and take the opportunity to check disc thickness and runout, since a warped disc on a loaded van produces a pedal pulsation that gets worse quickly. Also worth inspecting the slide pins: the H200 caliper is exposed to a lot of road spray and the pins are a known corrosion point. Fits all TRH and KDH chassis codes in the H200 range.
No image available
New
Brake Pads and Shoes
Toyota Avensis / Corolla Rear Brake Pads
New
Rear brake pad set for the Toyota Avensis and Corolla Verso, supplied by Hapad under Toyota part number 04466-05010. On both of these the rear axle runs discs rather than drums, which gives better fade resistance and a more consistent pedal, but does mean the rear pads need periodic inspection rather than being left alone for the life of the car. Rear pad wear is normally slow and even; anything uneven side to side is a caliper problem, not a pad problem. Fit in axle sets and clean the carrier abutments before installing. If the vehicle has an integrated parking brake acting on the rear discs, wind the piston back with the correct tool rather than forcing it, as the piston on these is threaded and will be damaged by a straight press.
No image available
New Only 3 left
Brake Pads and Shoes
Nissan Murano Rear Brake Pads
New
Rear brake pad set for the Nissan Murano, supplied by Hapad under Nissan's Pitwork part number AY060NS045. The Murano is a heavy all-wheel-drive crossover with four-wheel discs. The rear pads carry less of the braking load than the fronts but still wear steadily, and because the rear calipers see more road salt and spray than the fronts they are more prone to sticking slides and corroded backing plates. Replace as an axle set, clean the caliper carrier thoroughly, and check that both pads sit square and move freely before refitting. A hot rear wheel after a drive, or one rear pad noticeably thinner than its partner, points at the caliper rather than the pads. Please confirm your model year and chassis generation against this part number before ordering, as Murano rear brake specification changed between generations.
No image available
New Only 2 left
Brake Pads and Shoes
Mitsubishi Delica D:5 Rear Brake Pads (CV1W)
New
Rear brake pad set for the Mitsubishi Delica D:5, the CV-series eight-seat four-wheel-drive MPV built from 2007. The D:5 is genuinely heavy and genuinely used off sealed roads, which is a harder combination on rear brakes than most vans see. Grit and water get into the caliper, and the rear pads on these tend to wear unevenly if the slides are not maintained. Owners who use the vehicle as intended, loaded, on gravel, towing, should expect to inspect the rears more often than the mileage alone would suggest. Fit as an axle set, clean and re-grease the slide pins, and check the disc faces for scoring while the caliper is off. Confirmed fitment for CV1W, CV2W and CV5W.
No image available
New Only 3 left
Brake Pads and Shoes
Honda Civic / Integra / Stream / Edix Front Brake Pads
New
Front brake pad set carrying Honda part number 45022-S7A-000, an S7A-family pad shared across several Honda platforms of the early 2000s including the Stream, Civic, Integra and Edix. Honda front pads of this era are straightforward to service, with a simple sliding caliper and good access once the wheel is off. The usual wear indicators apply: a metallic squeal on light braking as the wear tab contacts the disc, then a heavier grinding once the material is gone. Replace as an axle set. On higher-mileage examples check the caliper piston dust boots at the same time, as a split boot lets water into the bore and the resulting corrosion will drag the pad and ruin a new set inside a few thousand kilometres. Please confirm your chassis code and model year against this part number before ordering, as this pad family spans several body styles.
No image available
New Only 2 left
Brake Pads and Shoes
Mitsubishi Galant / Lancer / Space Runner Front Brake Pads
New
Front brake pad set under Mitsubishi part number MN102618, covering the Galant and related Mitsubishi platforms of the same era. A conventional sliding-caliper front pad. Wear is normally even and predictable; a pull to one side under braking, or one side visibly more worn than the other, indicates a caliper that isn't releasing rather than a pad fault. Fit as an axle set. Clean the carrier abutments and check the anti-rattle shims are present and seated, as missing or distorted shims are the usual cause of brake squeal after a pad change on these. Please confirm your model, year and engine against this part number before ordering.