Authentic JDM Parts
Quality OEM and aftermarket parts for your Japanese vehicles. From engines to body parts — we've got you covered.
← Browse by Make / Model instead209+
Parts Available
100%
Quality Guaranteed
Fast
Shipping
New
Only 1 left
Transmission
Transmission Mount
Transmission Mount to fit the Mitsubishi Delica (PD6W), 3000cc petrol, 4x4. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Contact us for current pricing, availability and Canada-wide shipping.
New
Only 1 left
Steering
Ball Joint
Ball Joint to fit the Mitsubishi Delica (PD6W), 3000cc petrol, 4x4. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Contact us for current pricing, availability and Canada-wide shipping.
New
Only 1 left
Steering
Outer Tie Rods
Outer Tie Rods to fit the Mitsubishi Delica (PD6W), 3000cc petrol, 4x4. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Contact us for current pricing, availability and Canada-wide shipping.
New
Only 1 left
Steering
Inner Tie Rods
Inner Tie Rods to fit the Mitsubishi Delica (PD6W), 3000cc petrol, 4x4. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Contact us for current pricing, availability and Canada-wide shipping.
New
Only 1 left
Electrical
4WD Dashboard Light
4WD Dashboard Light to fit the Mitsubishi Delica (PD6W), 3000cc petrol, 4x4. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Contact us for current pricing, availability and Canada-wide shipping.
New
Only 1 left
Electrical
MAF Sensor
MAF Sensor to fit the Mitsubishi Delica (PD6W), 3000cc petrol, 4x4. Genuine JDM part imported from Japan by AutoCom JDM Motors, Abbotsford BC. Contact us for current pricing, availability and Canada-wide shipping.
New
Only 1 left
Cylinder Head Gaskets
Mitsubishi Delica / Pajero Cylinder Head Gasket
Genuine Mitsubishi cylinder head gasket, part number MD199282, covering the Delica, Pajero and Montero.
The head gasket seals combustion pressure, coolant and oil passages between the block and the cylinder head, and it is the hardest-working static seal on the engine. Failure typically follows an overheating event, and the symptoms depend on where it has let go: white exhaust smoke and coolant loss with no external leak, oil and coolant mixing into a mayonnaise-like emulsion under the filler cap, bubbling in the expansion tank, or persistent overheating that no amount of bleeding resolves.
Replacing a head gasket without addressing what caused the failure is wasted work. Have the head checked for flatness and skimmed if necessary, confirm the cooling system, radiator, thermostat, fan and water pump are all working, and always use new head bolts where the manufacturer specifies torque-to-yield.
Follow the correct torque sequence and staged tightening procedure exactly.
New
Only 1 left
Electrical
Honda Step-Wagon Rear Power Sliding Door Regulator
Genuine Honda rear power sliding door regulator, part number 72710-SLJ-013, for the Step-Wagon RG1 and RG2.
The regulator is the motorised mechanism that drives the powered sliding door open and closed. Failure is a common complaint on power-door Hondas of this generation and gives a fairly consistent set of symptoms: the door opens or closes part way and stops, moves slowly or unevenly, makes a grinding or clicking noise from the track area, or stops responding to the remote and switch entirely while still operating by hand.
Before ordering, confirm the fault is the regulator rather than something simpler. A worn roller or a dirty, obstructed track will cause the door's safety system to reverse or stop it, and the control unit will refuse to drive a door that is binding mechanically. Cleaning and lubricating the track is worth doing first.
Fits RG1 and RG2 only.
New
Only 2 left
Front Windshields
Honda Fit Front Windshield
Front windshield glass for the Honda Fit GE6 and GE8, built between 2007 and 2013. Laminated safety glass cut to factory dimensions for a direct glue-in replacement.
The Fit's windshield is unusually large and steeply raked for the size of the car, wrapping well forward of the A-pillars. That makes it more exposed to stone strikes than most small hatchbacks and it is a frequently replaced item as a result. It also makes correct fitment matter: a screen this size carries real structural load in a roof impact.
Bonded installation with the correct urethane and primer, professionally fitted. Allow full safe-drive-away time before returning the vehicle to the road.
Fits GE6 and GE8. Please confirm your mirror mount and shade band requirements before ordering, as these vary by trim level.
New
Only 3 left
Front Windshields
Honda Step-Wagon Front Windshield
Front windshield glass for the Honda Step-Wagon RG1 and RG2, built between 2005 and 2009. Laminated safety glass cut to factory dimensions for a direct glue-in replacement.
Laminated construction bonds two layers of glass to an interlayer, so an impact cracks the outer layer without the screen breaking apart. The bonded screen is also structural: it contributes to roof strength in a rollover and provides the backstop that the passenger airbag deploys against, which is why the quality of the bond matters as much as the quality of the glass.
This is a bonded installation requiring the correct urethane adhesive and primer, and should be fitted professionally. Allow the adhesive its full safe-drive-away time before the vehicle returns to the road.
Fits RG1 and RG2. Please confirm your mirror mount and shade band requirements before ordering.
New
Only 1 left
Front Windshields
Isuzu Elf Front Windshield Glass (Windscreen)
This is a direct OEM-equivalent front windshield glass designed for the Isuzu Elf (N-Series) light-duty truck range. Built to factory specifications, this laminated safety glass provides a precise, glue-in fitment with no modifications required. It offers excellent optical clarity, UV protection, and structural integrity to meet commercial vehicle safety standards.
Available in DOT-certified, heat-insulating laminated glass, this windshield is ideal for commercial use and suits a broad range of Isuzu Elf variants across multiple generations. The windscreen measures **1538 x 750 mm** and uses a **glue-in** fitment method, compatible with Isuzu Elf NKR/NHR models from 1994 to 2007.
New
Only 3 left
Front Windshields
Honda Odyssey Front Windshield
Front windshield glass for the Honda Odyssey RB3 and RB4, built between 2008 and 2013. Laminated safety glass cut to factory dimensions for a direct glue-in replacement.
The RB3/RB4 Odyssey is a low-roof MPV with a large, shallow-raked screen. As with any modern bonded windshield, the glass is a structural component: it stiffens the body shell, contributes to roof crush resistance, and acts as the reaction surface for passenger airbag deployment. A correctly bonded fit is a safety matter rather than a cosmetic one.
Bonded installation requiring the correct urethane adhesive and primer, and professional fitting. Allow the adhesive its full safe-drive-away time before the vehicle returns to the road.
Fits RB3 and RB4. Please confirm your mirror mount, sensor and shade band requirements before ordering, as these vary by trim.